User avatar
johan
GpsGate
Posts: 14919
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

Sanav GS-818,MU201,CT-24,GC-101,GX-101,MT-101...

Sat Aug 04, 2007 5:41 pm

How to connect Sanav GS-818, QG-201, MU201, CT-24, CT-58, GC-101, GX-101, MT-101 and more to GpsGate Server

Here is a video guide on how to connect GS-818:
http://gpsgate.com/videos?movie=xBLBOnQAEp4

How to install

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get More Plugins"
3. Go to "Get More Plugins". Install "Sanav".

4. Skip for hosted server. Open port 1337 for TCP/IP and UDP and port 8008 for HTTP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a device to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "Sanav ...".
7. Fill in the IMEI number of the tracker.
8. Click Save.


Configure your device to send data to your servers public IP port 1337. You find the public IP in SiteAdmin under Devices.

Manual setup of Sanav to send data to GpsGate Server

Send UDP and TCP data to port 1337

Configure your Sanav to send data over HTTP to:
http://yourdomain.com:8008/Sanav/

* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.

Troubleshooting

If you have your own server, please read this for trouble shooting:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10315

To monitor data communication between tracker and server you can use the "Terminal". More info here:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10740

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to use together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Device management
Use Template Commands to manage your trackers remotely:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10220

Manufacturer homepage
http://www.sanav.com/

Regards,
Johan

GpsGate Support

Return to “Supported GPS tracking devices”