User avatar
johan
GpsGate
Posts: 14550
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

ATrack AT1, AT3, AT5, AU5, AY5, AX5, AX7, AX9

Fri Nov 04, 2011 1:03 am

ATrack AS1, AS3, AT1, AT3, AT5, AU5, AY5, AX5, AX7, AX9, AU7 and AK7

How to install

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get more plugins".
3. Install "ATrack".

4. Skip for hosted server. Open port 6000 for TCP/IP and UDP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a tracker to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "ATrack ...".
7. Fill in the Device ID or IMEI number of the tracker.
8. Click Save.

Configure your device to send data to your servers public IP. You find the public IP in SiteAdmin under Devices.

How to setup your ATrack device PDF

ECO Driving

ECO Report configuration for ATrack
http://forum.gpsgate.com/topic.asp?TOPIC_ID=15139

Garmin FMI

Chat and Dispatch using Garmin Navigator device
http://forum.gpsgate.com/topic.asp?TOPIC_ID=17058

Camera

http://forum.gpsgate.com/topic.asp?TOPIC_ID=16290

Crash Detection

Accident alert and crash data visualisation for supported devices
http://gpsgate.com/blogComment/crash_data

Troubleshooting

If you have your own server, please read this for trouble shooting:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10315

To monitor data communication between tracker and server you can use the "Terminal". More info here:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10740

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to us together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Use Template Commands to manage your trackers remotely:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10220

How to enable extra fields using AT$FORM

Method 1 only supported for the ASCII protocol!

1. Make sure you have a firmware version that supports "%CI". Check with ATrack.
2. Include %CI in your AT$FORM command

Example: AT$FORM=0,,1,"%CI%SA"

Now GpsGate will understand the extra fields set to the server.

3. If there are any signals missing in the device mapper for the device type, please let us know and we will add them.

Method 2 supported by both Binary and ASCII protocol.

1. Edit the Device Type in SiteAdmin
-> Login to SiteAdmin
-> Go to Devices (top menu)
-> Go to Types (left menu)
-> Select Device Type in drop downs.
-> Scroll down.

2. Set the field "AT$FORM" to the format string you also send to the device.

Example: AT$FORM=0,,1,"%SA"

Now GpsGate will understand the extra fields set to the server.

3. If there are any signals missing in the device mapper for the device type, please let us know and we will add them.

NOTE! You also need to send the AT$FORM string to the device!
NOTE! For Iridium use AT$SATC instead.
NOTE! For FMS use AT$FMSC.

Manufacturer
http://atrack.com.tw

Updates
http://forum.gpsgate.com/topic.asp?TOPIC_ID=13761

Regards,
Johan

GpsGate Support

Return to “Supported GPS tracking devices”