User avatar
Posts: 15158
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

GlobalSat TR-203, TR-600, GTR-128, GTR-129, TR-313

Sat Apr 03, 2010 12:21 am

Updated: How to connect devices to GpsGate, click here

Support for GlobalSat TR-203, TR-600, GTR-128, GTR-129, TR-313

For TR-151 and TR-102 please read this:

How to install

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get More Plugins"
3. Install "GlobalSat2".

4. Skip for hosted server. Open port 5002 for TCP/IP and UDP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a device to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "GlobalSat ...".
7. Fill in the IMEI of the tracker.
8. Click Save.

Configure tracker

Configure tracker to send data to port 5002 over UDP or TCP
For HTTP the URL is "http://yourserver:8008/GlobalSat2/"

Configure your device to send data to your servers public IP. You find the public IP in SiteAdmin under Devices.


If you have your own server, please read this for trouble shooting:

To monitor data communication between tracker and server you can use the "Terminal". More info here:

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to use together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Custom commands

Use "Template Commands" to add commands not yet implemented in GpsGate Server. This is simple. More info here:

The driver will add the checksum. A Template Command to set GPRS and server parameters will for example look like this:

Code: Select all

Manufacturers homepage



GpsGate Support

Return to “Supported GPS tracking devices”