User avatar
johan
GpsGate
Posts: 14887
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

IntelliTrac A1, A1 Lite, A3, P1 and CAREU U1

Sat Aug 01, 2009 4:53 pm

How to connect IntelliTrac A1, A1 Lite, A3, P1, CAREU U1 Lite, CAREU USmart, CAREU UGo, CAREU UCAN and CAREU U1 to GpsGate Server

For IntelliTrac X1/X8 read this:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=9156

Here is a video guide on how to connect IntelliTrac A1 to GpsGate Server:
http://gpsgate.com/videos?movie=aD8K501eRwU

How to install

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get More Plugins"
3. Install "IntelliTrac".

4. Skip for hosted server. Open port 6090 for TCP/IP and UDP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a device to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "IntelliTrac ...".
7. Fill in the IMEI number of the tracker.
8. Click Save.


Configure your device to send data to your servers public IP port 6090. You find the public IP in SiteAdmin under Devices.

Manual setup of IntelliTrac A1/A3 to send data to GpsGate Server

Connect a terminal to your tracker. 57600 baud.

AT$RESET

AT$APN=apn,,
AT$HOSTS=1,0,IP address,6090
AT$IPTYPE=1
AT$FORMAT=1
AT$HB=120

Where apn e.g "internet" is the GPRS APN. And IP Address is the address to your server. E.g "234.77.77.0"

AT$PDSR=1,60,0,20,2,0,0,1,0

The AT$PDSR command starts time based tracking over GPRS with a 60 second interval

ECO driving
http://forum.gpsgate.com/topic.asp?TOPIC_ID=15932

Troubleshooting

If you have your own server, please read this for trouble shooting:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10315

To monitor data communication between tracker and server you can use the "Terminal". More info here:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10740

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to us together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Use Template Commands to manage your trackers remotely:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10220


Manufacturer
http://www.systech.com.tw/

Upgrades and fixes
http://forum.gpsgate.com/topic.asp?TOPIC_ID=12812

Regards,
Johan

Franson Support

Return to “Supported GPS tracking devices”