Posts: 1
Joined: Sat Jul 25, 2015 1:58 pm

How to factory reset QuecLink GL200?

Sun Jul 26, 2015 7:01 pm


How to factory reset QuecLink GL200 or delete password?

I have working special data cable mini-USB 10pin.

Is there another method?


OnPoint Tracking
Posts: 11
Joined: Thu Aug 21, 2014 3:11 pm
Location: USA
Contact: Website

RE: How to factory reset QuecLink GL200?

Mon Jul 27, 2015 4:12 pm

In my experience, the only way to bypass the configuration password is to do a firmware upgrade. in the process of upgrading the firmware you will have the option of restoring to default configuration. If you do this you will loose the current configuration that's on the device. The default password is gl200.

Are you sure the password was changed? GL200 doesn't respond to SMS commands via SMS, it will acknowledge the command via GPRS.

Do you have the configuration tool application for the device that matches the device firmware version?

onPoint GPS Tracking & Fleet Management

Posts: 1
Joined: Fri Oct 27, 2017 7:05 pm

Re: How to factory reset QuecLink GL200?

Fri Oct 27, 2017 7:06 pm

someone found the solution, I'm still looking for it, help me please

Posts: 2
Joined: Thu May 10, 2018 3:35 pm

Re: How to factory reset QuecLink GL200?

Thu May 10, 2018 3:51 pm


you must use:
Quecklink_Firmware_Upgrade_Took_Duplex_V2.09 (min.version).
In option you set Upgrade FW and Clear User data.

you use cable from Quecklink...

After it will be OK.


Return to “GPS trackers, AVL hardware, SIM subscriptions etc.”