Explorer2000
Posts: 10
Joined: Sun Sep 18, 2005 7:29 pm

Display two or more position of different vehicle

Sun Sep 18, 2005 7:36 pm

This is sample of the NMEA Data recevied
unit=1$GPGGA,055910.161,2840.9336,N,07704.0403,E,1,03,7.6,205.6,M,-35.9,M,0.0,0000*5F
unit=2$GPGGA,055910.161,2840.9336,N,07704.0403,E,1,03,7.6,205.6,M,-35.9,M,0.0,0000*5F
unit=3$GPGGA,055910.161,2840.9336,N,07704.0403,E,1,03,7.6,205.6,M,-35.9,M,0.0,0000*5F

i use split to seperate unit=1 from NMEA
e.g
packets = Split(recevie, $)
then
in array i have got
packets(0) 'in this array i have got unit=1
packets(1) ' in this array i have got NMEA setence which i pass to NMEAParser

objParser.Parse packet(1)


then i want to diplay position of all the unit as the same time with unitid as label

NWO
Posts: 13
Joined: Thu Jul 21, 2005 12:42 pm
Location: United Kingdom

RE: Display two or more position of different vehicle

Tue Sep 20, 2005 10:13 am

do u mean after read nmea data and place the icon on the map?

User avatar
johan
GpsGate
Posts: 15429
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: Display two or more position of different vehicle

Tue Sep 20, 2005 2:01 pm

Yes, that shoudl work. What is the concern?

Regards,
Johan

Franson Support

Return to “GpsTools”