User avatar
johan
GpsGate
Posts: 14372
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

Cellocator Cello-F, Cello-R, CelloTrack,370-50 etc

Fri Dec 30, 2011 2:29 pm

Support for Pointer / Cellocator Cello-F, Cello-R, CelloTrack, 370-50, Compact CAN, Compact Fleet, Compact Security

How to install

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get more plugins".
3. Install "Cellocator".

4. Skip for hosted server. Open port 231 for TCP/IP and UDP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a tracker to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "Cellocator ...".
7. Fill in the Device ID or IMEI of the tracker.
8. Click Save.

Configure your device to send data to your servers public IP. You find the public IP in SiteAdmin under Devices.

Garmin FMI support

http://forum.gpsgate.com/topic.asp?TOPIC_ID=18464

Troubleshooting

If you have your own server, please read this for trouble shooting:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10315

To monitor data communication between tracker and server you can use the "Terminal". More info here:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10740

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to us together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Use Template Commands to manage your trackers remotely:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10220


Regards,
Johan

GpsGate Support

User avatar
johan
GpsGate
Posts: 14372
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: Cellocator Cello-F, Cello-R, CelloTrack,370-50 etc

Wed May 04, 2016 3:07 pm

Some tips on writing Template Commands for Cellocator

The SMS protocol is straight forward and should not cause any problems.

However the protocol over GPRS is different from SMS, and includes things like binary ID, and checksum. Those things cannot be specified in the current Template Command editor, instead the GpsGate Cellocator plugin can automatically adds this data.

A GPRS command send from the server to the tracker is built up like this:
<System code><Message type><ID><Authentication code><Command code><Checksum>

In the Template Command use [0x00][0x00][0x00][0x00] for the Unit ID and [0x00] for the checksum.

Here is an example for the Output Control command 0x0101.

MCGP[0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x01][0x01][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00]

Please check the device documentation for command specifications, or post your questions to the forum and we'll try to answer them all.

Regards,
Johan

GpsGate Support

Return to “Supported GPS tracking devices”