merlinby
Posts: 2
Joined: Mon Feb 26, 2018 2:28 pm

Coban GPS303 Single location command

Mon Feb 26, 2018 2:37 pm

Please tell me how can I use Single location command
According to Coban "Protocol manual" I must send "**,imei:[DeviceImei],100"
I send it and recieve "Server: LOAD" message in terminal. But don't get any location information like
"imei:353451044508750,001,0809231929,,F,055403.000,A,2233.1870,N,11354.3067,E,0.00,,;"
What am I doing wrong?

davebarratt
Posts: 1
Joined: Sat Nov 17, 2018 2:31 pm

Re: Coban GPS303 Single location command

Mon Nov 19, 2018 11:53 am

Hi

I have exactly this problem.
May I ask if you ever solved it?

Dave

merlinby
Posts: 2
Joined: Mon Feb 26, 2018 2:28 pm

Re: Coban GPS303 Single location command

Fri Nov 23, 2018 7:27 am

No. The problem is still actual.

fotaber
Posts: 1
Joined: Mon Nov 26, 2018 6:07 pm

Re: Coban GPS303 Single location command

Mon Nov 26, 2018 6:21 pm

Hello everyone.

I am on a pre-employment internship in a company that does GPS tracking.
At this moment, I am facing a difficulty.

I was asked to install in the vehicle (YARIS year 200) a customer, the alarm system, with closing and opening doors remotely.

I have to do it with the TK103B plotter.
In the customer's vehicle, driver's side, a control module for opening and closing the doors, incorporates by the manufacturer.

I would like, please, to have a clear diagram of the different connections, which I will have to make on this subject.

Thanks for your help.

mikelord
Posts: 36
Joined: Wed Apr 02, 2014 6:59 pm
Location: Chile

Re: Coban GPS303 Single location command

Mon Nov 26, 2018 11:02 pm

Hola, el comando que te sirve es este :

**;imei:[deviceIMEI],B;

https://forum.gpsgate.com/viewtopic.php?t=16754



Saludos

Return to “GPS trackers, AVL hardware, SIM subscriptions etc.”