Page 1 of 1

tracker for reading Scania trucks diagnostics codes

Posted: Fri Oct 27, 2017 4:09 pm
by mojtabajml
Hi everybody

I need to have a device that can remotely read the Scania trucks diagnostics error codes(SAE J1939-73 Diagnostics Application Layer).

Re: tracker for reading Scania trucks diagnostics codes

Posted: Thu Nov 16, 2017 8:03 am
by naveencr
Hi,

I am normally using the Teltonika trackers to capture the J1939 CAN Data.
In the manual CAN option we can configure PGN FECA (DM 1 - Active Diagnostic Trouble Codes) to read the error codes.

But there is a problem in this method.
If more than one Trouble codes active at the same time, J1939 using transport protocol to send data.
i.e. it will send as multipacket message.At that time there will be no data in FECA PGN.
PGN EB00 is using to send multi packet message.

To capture all the error codes,we need to use a tracker it should support J1939 Transport protocol function (J1939/21).
But I think because of price ,we don't have such trackers available in the market.

Thanks
Naveen

Re: tracker for reading Scania trucks diagnostics codes

Posted: Fri Dec 08, 2017 9:14 pm
by Arman.Taghian
Hi Naveen,
Do you use any FMS interface or ALLCAN300 to connect your Teltonika devices to Scania's CAN bus or there is a built-in FMS on Scania trucks ?

Thanks,
Arman

Re: tracker for reading Scania trucks diagnostics codes

Posted: Sun Dec 10, 2017 2:54 pm
by naveencr
Hi Arman,

Six truck companies were developed FMS standard and Scania is one of them.
So FMS is there in Scania Trucks.
What I am normally doing is,will use some CAN scan tools to capture the J1939 data from the trucks.
According to the RAW data,I will configure manual CAN in Teltoika FM Devices.

Thanks
Naveen

Re: tracker for reading Scania trucks diagnostics codes

Posted: Wed Dec 13, 2017 12:14 pm
by mojtabajml
Thanks naveencr for your answer, I searched and I found that Ruptela FM-TC4 HCV has an option on CAN1 input for j1939+DTC.
https://www.ruptela.com/product/fm-tco4-hcv/
Image
also Ruptela has provided a part of devices protocol for sending all Diagnostic codes to server.

Re: tracker for reading Scania trucks diagnostics codes

Posted: Wed Dec 13, 2017 2:43 pm
by naveencr
Hi,

I didn't use ruptela yet.
If it support DTC,it's great.Did you use ruptela ? How is the performance of the device ?
I really want to switch.

Thanks
Naveen