williams
Posts: 11
Joined: Tue Mar 06, 2012 10:48 pm
Location: United Kingdom

Meitrack T68 OBD Device Mapper Settings

Mon May 05, 2014 9:18 pm

Hi all. I am testing the Meitrack T68 OBD Canbus tracker on my GG server. I go into device mapper but do not see any entries under the column 'Device inputs' which relate to harsh braking/acceleration etc. Anybody know how i can get this device to work with eco driving reports?

Also i do not see a device input for fuel level or fuel consumption?

I might be missing something here but i have searched the forum and not found much on this T68 unit.

Regards

Dean

hamdta
Posts: 56
Joined: Mon Jun 16, 2008 4:40 pm
Location: Portugal
Contact: Skype

RE: Meitrack T68 OBD Device Mapper Settings

Sat Jun 14, 2014 3:45 am

Hi
I am not see what you mean (exactly),but did you see any gprs/sms data with MyComm software,between your TC68 and your server,or any other proxy (port and terminal)?

Regards


Paulo

vaughancoke
Posts: 2
Joined: Sat Jun 21, 2014 4:27 pm
Location: Australia

RE: Meitrack T68 OBD Device Mapper Settings

Sat Jun 21, 2014 4:58 pm

Hey all.

I'm having the same problem with trying to get harsh braking/acceleration to appear in "Device Mappings" and/or "Device Mapping Template". I can see the option in the "Device Mapper Template" section and within the "Output" pop-down list, put as its not listed in the "Input" section I cannot setup a mapping. Any help would be greatly appreciated.

To explain what I'm doing,
- Log into "Site Administration application"
- Click "Devices" TAB.
- Click "Types" sub menu on the left.
- Under the "Device Type" pop-down box, select Meitrack TC68
- Under the "Device Mapper Template" section, the following "Input" options are available:
AirFlow
AtmosphericPressure
BatteryVoltage
CellID
EngineCoolantTemperature
EngineLoad
EngineRPM
EventID
ExternalVoltage
FuelConsumption
FuelLevel
GsmSignal
HDOP
Ignition
IntakeAirTemperature
IntakeTubeAbsolutePressure
LAC
MCC
MNC
OBDII_Mileage
OdometerAcc
OilPressure
SatelliteCount
Speed
ThrottlePosition

- Under the "Device Mapper Template" section, the following "Output" options are available:
--SELECT--
Acceleration
Battery Voltage
BatteryLevel
Cargo Temperature
CellID
CustomAnalog1
CustomAnalog2
CustomAnalog3
CustomAnalog4
Distance
EngineRPM
ErrorLevel
ErrorNumber
EventCode
FirmwareVersion
Fuel level
FuelRate
GPS Antenna Voltage
GsmSignalLevel
HardwareVersion
HarshAcceleration
HarshBreaking
HarshTurning
HDOP
Humidity
Indoor Temperature
KeyPad
LAC
MCC
MNC
Odometer
OdometerAcc
Oil Pressure
Oil Temperature
Outdoor Temperature
Pressure
ReportID
SatelliteCount
Speed
Temperature
Temperature2
Temperature3
Temperature4
Tire Pressure
Voltage
Volume

sirfragles
Posts: 6
Joined: Fri Jul 18, 2014 7:35 pm
Location: Poland

RE: Meitrack T68 OBD Device Mapper Settings

Sat Jul 19, 2014 2:17 am

Hi Same here, can someone give a hand with proper setup. thx

hamdta
Posts: 56
Joined: Mon Jun 16, 2008 4:40 pm
Location: Portugal
Contact: Skype

RE: Meitrack T68 OBD Device Mapper Settings

Tue Jul 29, 2014 1:25 am

Hi
Did you see the TC68 send this kind of data to GPSgate server? Did you see the TC68 receive this data when connected to a PC with MyCom software (http://www.meitrack.net/meitrack-suppor ... /MyCOM.zip)? Or on the Gpsgate terminal seems possible monitor de GPRS data from TC68.
If this data is feed to GPSgate server from TC68 (i am not use yet the GPSgate software),so seems a problem on integration of GPSgate server...

Regards
Paulo


Paulo

Baje
Posts: 28
Joined: Tue Sep 02, 2014 3:39 am
Location: Barbados

RE: Meitrack T68 OBD Device Mapper Settings

Wed Oct 15, 2014 3:36 am

Hi,

Anyone got this sorted? I have 2 tc68's id like to get figured out.

Thanks

Return to “GPS trackers, AVL hardware, SIM subscriptions etc.”