I have Teltonika FM1100 and FM5300 and I'd like to send remote commands through Gprs using Tcp/ip instead of costly (and lengthy) sms.
I have an outgoing Tcp/Ip connection established with a device that is sending its position to the server every minute, but sending commands formatted according to the manual has no effect whatsoever.
Sms command getstatus or any other sms command has no effect and no response is received.
Gprs command #GET VERSION or any other gprs command has no effect and no response is received.
setparam 1245 127.0.0.1 or any other gprs command has no effect and the server address field is not changed if a check with Teltonika software configurator.
Any help is appreciated.