mdoble
Posts: 25
Joined: Wed Apr 17, 2013 9:13 pm
Location: USA

Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 3:22 pm

I am connected to a Chameleon CTM-200 device on my local Ethernet network at ip address 192.168.1.96. I do not get any vehicle location updates. It shows that the vehicle has never been seen. Please let me know if I have a configuration error.

Under Add New User I set the IP address to 192.168.1.96 and port to 5005. IMEI and APM are blank.

Under the Listerner for my device it shows one connection to Cypress Protocal over TCP/IP Port 5005

Under the terminal for my CTM-200 device it shows No data available for the selected device...

Under show unknow connections, I see the following messages updated every 10 seconds:
[7/29/2013 10:42:22 AM] (192.168.1.96:59441/Cypress/tcp) Client: $PGPS,104221.00,A,3746.2510,N,12156.6954,W,000.0,002.0,290713,+00194,9,00000000000*4B[0x0D][0x0A]

[7/29/2013 10:51:44 AM] (192.168.1.96:37790/Cypress/tcp) Client: $PGPS,105142.00,A,3746.2512,N,12156.6963,W,000.0,002.0,290713,+00193,8,00000000000*4C[0x0D][0x0A]

after ever 7 messages the unit is discounted and the Terminal ID changes.

What is the meaning of the number :59441 after the IP address in the above message. This number keeps changing, so I assume it is not a port number.

Under the CTM-200 setup I set GPS report to NMEA PGPS GPS data with modem ID. Local IP address is set to 192.168.1.200 which is the IP address of my gpsgate server. Set local port to 5005.

Under the CTM-200 setup I set a fixed GPS location of -121.94484 and 37.77074.


Below is the last error log
2013-07-29 03:22:23.2244 | Error | 28 | ExtendedRpcDispatcher.OnError | Error executing JSON method | GpsGate.Client.GateNoResponseException: No response from server
at GpsGate.Client.GpsGateClientCmd.CmdToServer(FRCMD cmdToServer)
at GpsGate.Terminal.TerminalClient.m_SendCommand(FRCMD cmd)
at GpsGate.Terminal.TerminalClient.GetMessageList(Int64 lngID, String strType, DateTime dtLastUpdate)
at GpsGate.Terminal.Service.TerminalFacade.GetMessageList(Int32 iApplicationID, Int64 lngID, String strType, DateTime dtLastUpdate)
at GpsGate.Terminal.Service.json.Terminal.GetMessageList(Int32 appId, Int64 lngID, String strType, DateTime dtLastUpdate)


Below are the last couple of err in the NMEA log from the day before.
2013-07-28 17:26:22.0888 | Error | 5 | Scheduler.NotifyObserverRemove | Task: NightlyMaintenance: ExecCount: 0 State: Scheduled LastExecuted: 1/1/0001 12:00:00 AM |
2013-07-28 17:26:22.8232 | Error | 4 | RestarterListener.m_Execute | System.IO.IOException | System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.Socket.Send(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamWriter.Flush(Boolean flushStream, Boolean flushEncoder)
at System.Xml.XmlTextWriter.Flush()
at Franson.Restarter.RestarterListener.m_Execute(Object state)
2013-07-28 18:15:55.1921 | Error | 6 | DAOFactory.get_DatabaseOnline | System.Data.Odbc.OdbcException | System.Data.Odbc.OdbcException: ERROR [HY000] [MySQL][ODBC 5.1 Driver]Can't connect to MySQL server on 'localhost' (10061)
ERROR [HY000] [MySQL][ODBC 5.1 Driver]Can't connect to MySQL server on 'localhost' (10061)
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle)
at System.Data.Odbc.OdbcConnectionOpen..ctor(OdbcConnection outerConnection, OdbcConnectionString connectionOptions)
at System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.Odbc.OdbcConnection.Open()
at Franson.DAO.DAOFactory.get_DatabaseOnline()

I turned off all firewalls

All plug ins are up to date.

When I run the test for Listner over TCP I get a error: Public Access Disabled (tested 7/29/2013 11:14:15 AM), Failed to send test data to listener. But I am connect to my device over the same Ethernet network, so I assume this is not a problem.

When I run the test for Listner over UDP I get the following test results.
Test Results:
Trying to send test data to listener.
Test data sent to listener OK.
Checking for incoming test data.
Check for incoming test data timed out.


The following is the last error I checked, which is 10 min old.
2013-07-29 04:12:03.8801 | Error | 83 | ExtendedRpcDispatcher.OnError | Error executing JSON method | System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 127.0.0.1:30175
at GpsGate.Directory.Service.DirectoryFacade.GetDeviceCommandStatus(Int32 iApplicationID, Int32 iDeviceID, Boolean bOutgoing)
at GpsGate.Directory.Service.json.Directory.GetDeviceCommandStatus(Int32 appId, String groupName, Int32 iDeviceID, Boolean bOutgoing)

User avatar
johan
GpsGate
Posts: 14958
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 5:43 pm

[7/29/2013 10:42:22 AM] (192.168.1.96:59441/Cypress/tcp) Client: $PGPS,104221.00,A,3746.2510,N,12156.6954,W,000.0,002.0,290713,+00194,9,00000000000*4B[0x0D][0x0A]

If we take a look at this data we can see that the ID sent up by the device is "00000000000". It is probably some kind of setting on the device itself to make it sendup its IMEI rather than 00000000000.

Regards,
Johan

GpsGate Support

mdoble
Posts: 25
Joined: Wed Apr 17, 2013 9:13 pm
Location: USA

RE: Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 8:47 pm

I added a Gateway ID to my device of 1234 and the IMEI is now 1234 in the message below. I changed the device IMEI under user edit to 1234, but still not working.
[7/29/2013 4:43:22 PM] (192.168.1.96:40873/Cypress/tcp) Client: $PGPS,164318.00,A,3746.2535,N,12156.6972,W,000.0,002.0,290713,+00196,12,1234*49[0x0D][0x0A]

User avatar
johan
GpsGate
Posts: 14958
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 8:55 pm

Post complete Terminal data.

Regards,
Johan

GpsGate Support

mdoble
Posts: 25
Joined: Wed Apr 17, 2013 9:13 pm
Location: USA

RE: Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 11:19 pm

I added a Gateway ID to my device of 1234 and the IMEI is now 1234 in the message below. I changed the device IMEI under user edit to 1234, but still not working.
[7/29/2013 4:43:22 PM] (192.168.1.96:40873/Cypress/tcp) Client: $PGPS,164318.00,A,3746.2535,N,12156.6972,W,000.0,002.0,290713,+00196,12,1234*49[0x0D][0x0A]

mdoble
Posts: 25
Joined: Wed Apr 17, 2013 9:13 pm
Location: USA

RE: Not updating vehicle location for a CTM-200

Mon Jul 29, 2013 11:47 pm

Below is the Terminal data. The Data is changing back and forth between the two different formats of data you see below.
ID 138

[7/29/2013 7:34:44 PM] (192.168.1.96:57043/Cypress/tcp) Disconnect
[7/29/2013 7:34:43 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:42 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:41 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:34:40 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:39 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.04*3A[0x0D][0x0A]
[7/29/2013 7:34:38 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.03*3D[0x0D][0x0A]
[7/29/2013 7:34:37 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.03*3D[0x0D][0x0A]
[7/29/2013 7:34:36 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.03*3D[0x0D][0x0A]
[7/29/2013 7:34:35 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.03*3D[0x0D][0x0A]
[7/29/2013 7:34:34 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.04*3A[0x0D][0x0A]
[7/29/2013 7:34:33 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.05*3B[0x0D][0x0A]
[7/29/2013 7:34:32 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.05*3B[0x0D][0x0A]
[7/29/2013 7:34:31 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.06*38[0x0D][0x0A]
[7/29/2013 7:34:31 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.06*38[0x0D][0x0A]
[7/29/2013 7:34:30 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.07*39[0x0D][0x0A]
[7/29/2013 7:34:28 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.06*38[0x0D][0x0A]
[7/29/2013 7:34:27 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.07*39[0x0D][0x0A]
[7/29/2013 7:34:26 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.07*39[0x0D][0x0A]
[7/29/2013 7:34:25 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:34:24 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.09*37[0x0D][0x0A]
[7/29/2013 7:34:23 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:34:22 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:34:21 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.06*38[0x0D][0x0A]
[7/29/2013 7:34:20 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.02*3C[0x0D][0x0A]
[7/29/2013 7:34:19 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:18 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:17 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:16 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:15 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:14 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:13 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:12 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:11 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:10 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:09 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:08 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:07 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:06 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:06 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:05 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:03 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:02 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:01 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:34:00 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:59 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:58 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:57 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:56 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:55 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:54 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:53 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:52 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:51 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:50 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:49 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:48 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:47 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:46 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:45 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:44 PM] (192.168.1.96:57043/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:44 PM] (192.168.1.96:57043/Cypress/tcp) Connect

ID 137

[7/29/2013 7:33:41 PM] (192.168.1.96:57042/Cypress/tcp) Disconnect
[7/29/2013 7:33:40 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.02*3C[0x0D][0x0A]
[7/29/2013 7:33:39 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.04*3A[0x0D][0x0A]
[7/29/2013 7:33:38 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.07*39[0x0D][0x0A]
[7/29/2013 7:33:37 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:33:36 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:33:35 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.07*39[0x0D][0x0A]
[7/29/2013 7:33:34 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.08*36[0x0D][0x0A]
[7/29/2013 7:33:33 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:33:32 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:31 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:30 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:29 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:28 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:27 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:26 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:25 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:24 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:23 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:22 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:22 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:20 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:19 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:18 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:17 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:16 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:15 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:14 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:13 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:12 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:11 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:10 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:09 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:08 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:07 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:06 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:05 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:04 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:03 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:02 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:01 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:33:00 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:59 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:58 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:58 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:56 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:55 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:54 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:53 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:52 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:32:51 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:50 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:32:49 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:32:48 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:47 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:46 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.00*3E[0x0D][0x0A]
[7/29/2013 7:32:45 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:32:44 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.02*3C[0x0D][0x0A]
[7/29/2013 7:32:43 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.01*3F[0x0D][0x0A]
[7/29/2013 7:32:42 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.03*3D[0x0D][0x0A]
[7/29/2013 7:32:41 PM] (192.168.1.96:57042/Cypress/tcp) Client: $PINA,6,0.04*3A[0x0D][0x0A]
[7/29/2013 7:32:41 PM] (192.168.1.96:57042/Cypress/tcp) Connect

ID 136

[7/29/2013 7:33:27 PM] (192.168.1.96:57041/Cypress/tcp) Disconnect
[7/29/2013 7:33:27 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193325.00,A,3746.2547,N,12156.6981,W,000.0,002.0,290713,+00191,10,1234*43[0x0D][0x0A]
[7/29/2013 7:33:17 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193314.00,A,3746.2547,N,12156.6981,W,000.0,002.0,290713,+00191,8,1234*78[0x0D][0x0A]
[7/29/2013 7:33:07 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193304.00,A,3746.2545,N,12156.6990,W,000.0,002.0,290713,+00191,9,1234*7A[0x0D][0x0A]
[7/29/2013 7:32:57 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193254.00,A,3746.2545,N,12156.6990,W,000.0,002.0,290713,+00191,9,1234*7E[0x0D][0x0A]
[7/29/2013 7:32:47 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193245.00,A,3746.2545,N,12156.6990,W,000.0,002.0,290713,+00191,7,1234*70[0x0D][0x0A]
[7/29/2013 7:32:37 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193235.00,A,3746.2545,N,12156.6990,W,000.0,002.0,290713,+00191,9,1234*79[0x0D][0x0A]
[7/29/2013 7:32:27 PM] (192.168.1.96:57041/Cypress/tcp) Client: $PGPS,193225.00,A,3746.2545,N,12156.6990,W,000.0,002.0,290713,+00191,9,1234*78[0x0D][0x0A]
[7/29/2013 7:32:27 PM] (192.168.1.96:57041/Cypress/tcp) Connect

User avatar
johan
GpsGate
Posts: 14958
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: Not updating vehicle location for a CTM-200

Tue Jul 30, 2013 12:55 am

Only UDP is supported for Cypress. Please change to UDP.

Regards,
Johan

GpsGate Support

Return to “GpsGate Server - How to setup and use”