MiKa
Posts: 2
Joined: Tue Aug 03, 2010 6:07 pm
Location: Austria

[Q]: Internetconnection when GpsGate starts

Tue Aug 03, 2010 6:14 pm

Using GpsGate on Windows mobile 6.5 I've recognized an internetconnection whenever I am starting GpsGate.

My settings are:

Input:
Com4,9600

Output:
GpsGate Direct
Virtual Com6/ (All NMEEA) NMEA Filter

How do I get information why an internetconnection ist started?

And when I try to remove GpsGate Direct the Error:
10019: Cannot remove GpsGate Direct Output

is displayed.

User avatar
johan
GpsGate
Posts: 15158
Joined: Wed Aug 04, 2004 10:40 pm
Location: Sweden
Contact: Website

RE: [Q]: Internetconnection when GpsGate starts

Tue Aug 03, 2010 6:24 pm

Nothing in that configuration access the internet. Something else accesses internet.

Some GPS receivers do fetch AGPS information over GPRS. Maybe your device is configured to do that. I would look into that to start with.

Regards,
Johan

GpsGate Support

richardhula
Posts: 96
Joined: Sun Jul 17, 2005 6:33 pm

RE: [Q]: Internetconnection when GpsGate starts

Wed Aug 04, 2010 1:42 pm

On my Nokia N97 I can configure both Assisted (cell tower) & Network (Internet) based assistance for GPS fix, so that is almost certainly the answer.

Richard

There no place like 127.0.0.1

MiKa
Posts: 2
Joined: Tue Aug 03, 2010 6:07 pm
Location: Austria

RE: [Q]: Internetconnection when GpsGate starts

Sat Aug 21, 2010 11:50 am

Hello,

thanks for your postings, I had to turn off XTRA-server to run it without any internet connection.
These settings are OK to run GpsGate 2.6 on Samsung Omnia II (Windows mobile 6.5) without any internet connection.

Gtx,
Mika
Fotomobil.at

=======================

Allgemeine Einstellungen=>GPS=>Verbindung
GPS-Programmanschluss:
COM4
GPS-Hardwareanschluss:
COM9
Baud-Rate:
9600
GPS automatisch verwalten [ON]

Allgemeine Einstellungen=>GPS=>XTRA
XTRA-Server aktivieren [OFF]
Wenn die Daten abgelaufen sind [OFF]
Wenn über ActiveSync ein Verbindung mit einem PC vorhanen ist [OFF]
SNT-Server aktivieren [OFF]

GpsGate 2.6=>Settings=>Input
COM4,9600
Close input when idel [OFF]
Close input on power off [ON]
Input (MUX) [OFF]

GpsGate 2.6=>Settings=>Input=>Settings
Serial Port:
COM4
Baud Rate:
9600
Parity:
No
Stop Bits:
One
Handshake:
None
Byte Size:
8
DTR [ON]
RTS [ON]

GpsGate 2.6=>Settings=>Output
Block data from output [OFF]
Block data to output [OFF]
Retry creation:
On Error
Active output:
GpsGate Direc
Virtual COM6 / (All NMEA) NMEA Filter

GpsGate 2.6=>Settings=>Advanced
Default
Active [On]
Start GpsGate after soft reset [OFF]
Display brighter tray icon [OFF]

Return to “GpsGate Splitter - How to setup and use”