mojtabajml
Posts: 9
Joined: Wed Jun 18, 2014 11:58 am
Location: Iran
Contact: Website

tracker for reading Scania trucks diagnostics codes

Fri Oct 27, 2017 4:09 pm

Hi everybody

I need to have a device that can remotely read the Scania trucks diagnostics error codes(SAE J1939-73 Diagnostics Application Layer).

naveencr
Posts: 7
Joined: Sat Apr 12, 2014 11:51 am
Location: Dubai,UAE

Re: tracker for reading Scania trucks diagnostics codes

Thu Nov 16, 2017 8:03 am

Hi,

I am normally using the Teltonika trackers to capture the J1939 CAN Data.
In the manual CAN option we can configure PGN FECA (DM 1 - Active Diagnostic Trouble Codes) to read the error codes.

But there is a problem in this method.
If more than one Trouble codes active at the same time, J1939 using transport protocol to send data.
i.e. it will send as multipacket message.At that time there will be no data in FECA PGN.
PGN EB00 is using to send multi packet message.

To capture all the error codes,we need to use a tracker it should support J1939 Transport protocol function (J1939/21).
But I think because of price ,we don't have such trackers available in the market.

Thanks
Naveen
Thanks in advance
Naveen
naveencrapheal@gmail.com

Arman.Taghian
Posts: 5
Joined: Tue Dec 05, 2017 8:21 pm
Location: Dubai
Contact: Website Skype

Re: tracker for reading Scania trucks diagnostics codes

Fri Dec 08, 2017 9:14 pm

Hi Naveen,
Do you use any FMS interface or ALLCAN300 to connect your Teltonika devices to Scania's CAN bus or there is a built-in FMS on Scania trucks ?

Thanks,
Arman
Arman - GateX Innovations

naveencr
Posts: 7
Joined: Sat Apr 12, 2014 11:51 am
Location: Dubai,UAE

Re: tracker for reading Scania trucks diagnostics codes

Sun Dec 10, 2017 2:54 pm

Hi Arman,

Six truck companies were developed FMS standard and Scania is one of them.
So FMS is there in Scania Trucks.
What I am normally doing is,will use some CAN scan tools to capture the J1939 data from the trucks.
According to the RAW data,I will configure manual CAN in Teltoika FM Devices.

Thanks
Naveen
Thanks in advance
Naveen
naveencrapheal@gmail.com

mojtabajml
Posts: 9
Joined: Wed Jun 18, 2014 11:58 am
Location: Iran
Contact: Website

Re: tracker for reading Scania trucks diagnostics codes

Wed Dec 13, 2017 12:14 pm

Thanks naveencr for your answer, I searched and I found that Ruptela FM-TC4 HCV has an option on CAN1 input for j1939+DTC.
https://www.ruptela.com/product/fm-tco4-hcv/
Image
also Ruptela has provided a part of devices protocol for sending all Diagnostic codes to server.

naveencr
Posts: 7
Joined: Sat Apr 12, 2014 11:51 am
Location: Dubai,UAE

Re: tracker for reading Scania trucks diagnostics codes

Wed Dec 13, 2017 2:43 pm

Hi,

I didn't use ruptela yet.
If it support DTC,it's great.Did you use ruptela ? How is the performance of the device ?
I really want to switch.

Thanks
Naveen
Thanks in advance
Naveen
naveencrapheal@gmail.com

Return to “GPS trackers, AVL hardware, SIM subscriptions etc.”