Profile | Register | Active Topics | Search | FAQ

Advanced Search
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 GpsGate
 Supported GPS tracking devices
 SensorLogic, QuecLink GL100, GL200, GL500, GT300
 Forum Locked
 Printer Friendly
Digg this
Author Previous Topic Topic Next Topic  

johan
Forum Admin

Sweden
15472 Posts

Posted - 07/21/2009 :  06:11:32  Show Profile  Visit johan's Homepage
Support for SensorLogic / QuecLink / Poputek GL100, GL200, GL500, GT200, GT300, GT500, GV200, GV300, GV500, GV500W, GT300, GV55 and GV55LITE

How to install for GpsGate Server

1. Login to SiteAdmin
2. Go to Plugins. Click on "Get More Plugins"
3. Install "SensorLogic".

4. Skip for hosted server. Open port 13513 for TCP/IP and UDP in your firewall, and direct the traffic to the server you installed GpsGate Server on.

Verify the firewall is setup and the plugin is installed correctly.

1. Login to SiteAdmin
2. Go to Devices
3. Click on "Test" for the listener you want to verify.

How to add a vehicle and how to add a device to a vehicle.

1. Login to your VehicleTracker application

2. Click "Add new User"
3. Select "Device" in "User Type" drop down. Click Next.
3. Enter a "username" and a "Name", which is the name displayed on the map and in list. Click "Next".
4. Click Next for Roles.
5. Click Next for Tags.
6. Select Device Type to "SensorLogic ...".
7. Fill in the IMEI of the tracker.
8. Click Save.

Configure your device to send data to your servers public IP port 13513. You find the public IP in SiteAdmin under Devices.

Setup Eco Report
http://forum.gpsgate.com/topic.asp?TOPIC_ID=16181

Setup Garmin FMI
http://forum.gpsgate.com/topic.asp?TOPIC_ID=17004

Troubleshooting

If you have your own server, please read this for trouble shooting:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10315

To monitor data communication between tracker and server you can use the "Terminal". More info here:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10740

If you can see data coming in from the GPS tracker in the Terminal, but you still don't get a position on the map, you can send the output from the Terminal to use together with information about your GPS tracker and we will take a look at it. Send it to "support at gpsgate . com"

Device management
Use Template Commands to manage your trackers remotely:
http://forum.gpsgate.com/topic.asp?TOPIC_ID=10220

Updates
http://forum.gpsgate.com/topic.asp?TOPIC_ID=12926

Regards,
Johan

Franson Support

johan
Forum Admin

Sweden
15472 Posts

Posted - 02/23/2014 :  07:49:51  Show Profile  Visit johan's Homepage
Time Zone

The best option is that you set your devices to use UTC+0

OR

You can set the Time Zone used by the device.

1. Make sure all your devices are up to date under SiteAdmin -> Plugins.

2. Go to Devices (top menu in SiteAdmin)
3. Go to Types (left menu)
4. Select the Device Type you want to change the "Time Zone" for.
5. Scroll down and set "Time Zone" (e.g. -6 for EST)
6. Save.


Regards,
Johan

GpsGate Support
Go to Top of Page

johan
Forum Admin

Sweden
15472 Posts

Posted - 02/23/2014 :  07:51:08  Show Profile  Visit johan's Homepage
Queclink GL200 sample setup

You can send the following commands to your Queclink device to get it online.

Replace the APN information below with the information that applies to your telecom operator.
Replace the IP address with the address of your GpsGate Server installation.

Combined command to setup both the APN and Server information (maximum 160 characters!)
Template:
AT+GTQSS=<Device Password>,<APN>,<APN Username>,<APN Password>,<Report mode>,,<Buffer Enable>,<Server1 IP>,<Server1 Port>,<Server2 IP>,<Server2 Port>,<SMS Gateway>,<Heartbeat>,<SACK>,,,<Serial>$

Note: You should enter your GpsGate Server IP address for both Server1 and Server2.

Sample:
AT+GTQSS=gl200,online.telia.se,,,2,,1,69.10.131.178,13513,69.10.131.178,13513,+44123456789,0,1,,,0001$

Separate command to setup APN information
Template:
AT+GTBSI=<Device Password>,<APN>,<APN Username>,<APN Password>,,,,,<Serial>$

Sample:
AT+GTBSI=gl200,online.telia.se,,,,,,,0002$

Separate command to setup Server IP information
Template:
AT+GTSRI=<Device Password>,<Report mode>,,<Buffer Enable>,<Server1 IP>,<Server1 Port>,<Server2 IP>,<Server2 Port>,<SMS Gateway>,<Heartbeat>,<SACK>,,,,,<Serial>$

Sample:
AT+GTSRI=gl200,2,,1,69.10.131.178,13513,69.10.131.178,13513,+44123456789,0,1,,,,,0001$

Command to setup 30 second tracking
Template:
AT+GTFRI=<Device Password>,>Mode>,<Discard no fix>,,,<Begin time>,<End time>,<check interval1>,<send interval1>,<check interval2>,<send interval2>,<Report mask>,<Distance>,<Mileage>,<Movement>,<MSpeed>,<MDistance>,<MReports>,<Angle>,,<Serial>$

Sample:
AT+GTFRI=gl200,1,1,,,0000,2359,30,30,30,30,17,300,300,1,5,50,3,0,,0000$

Note: More advanced tracking schedules can be setup based on both traveled distance and direction change.


Regards,
Johan

GpsGate Support
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
GpsGate Forum © 2014 GpsGate AB Go To Top Of Page